5000. Thermodynamics of Materials. 3 hours. The zeroth law of thermodynamics, work, energy and the first law of thermodynamics; the second law of thermodynamics, thermodynamic potentials, the third law of thermodynamics, thermodynamic identities and their uses, phase equilibria in one-component systems, behavior and reactions of gases. Solutions, binary and multicomponent systems: phase equilibria, materials separation and purification. Electrochemistry. Thermodynamics of modern materials including liquid crystals.
5010. Bonding, Structure and Crystallography. 3 hours. Interatomic bonding; amorphous and crystalline structures in metals, ceramics and polymers; point and line defects in crystals; structure determination by X-ray diffraction; basic symmetry operations, point and space groups in crystal systems. Prerequisite(s): MFET 3450.
5020. Mechanical Properties of Materials. 3 hours. Stress, strain and the basics of concepts in deformation and fracture for metals, polymers and ceramics. Analysis of important mechanical properties such as plastic flow, creep, fatigue, fracture toughness, and rupture. Application of these principles to the design of improved materials and engineering structures.
5030. Transport Phenomena and Materials Processing. 3 hours. Principles of transport phenomena (momentum, heat, and mass transport) in materials processes. Emphasis on applications of appropriate differential equations and boundary conditions to solve materials processing problems. Prerequisite(s): MTSE 5000 and MTSE 5010 or consent of instructor.
5070. Tribology of Materials. 3 hours. Contact mechanisms of surfaces. Friction, wear and lubrication of solids and liquids. Laboratory equipment used in tribological investigations. Theoretical and empirical models of tribology.
5100. Fundamental Concepts of Materials Science. 3 hours. Crystal structures including defects and structures of non-crystalline materials. Phase diagrams, intermolecular forces. Organic raw materials, metals and alloys, ceramics, electronic materials, liquid crystals, polymers, natural and synthetic composites, smart materials, hybrids. Mechanical, thermophysical, electrical, magnetic and surface properties including tribology, corrosion and degradation. Testing of materials. Prerequisite(s): consent of department.
5200. Advanced Concepts of Metallurgical Science. 3 hours. Chemical and physical properties of metals and alloys. Emphasis on the relationship of structure and thermodynamics to behavior. Topics include crystal structure, thermodynamics, phase diagrams, phase transformations, oxidation, mechanical, electrical and magnetic properties. Prerequisite(s): PHYS 4110, CHEM 3510 or consent of department.
5210. Corrosion and Oxidation of Materials. 3 hours. Electrochemical corrosion mechanisms, corrosion prevention and high temperature corrosion. Oxidation mechanisms of metals and alloys, internal oxidation, oxidation resistant alloys and other methods of oxidation protection. Prerequisite(s): MTSE 5200 or consent of department.
5300. Science and Technology of Modern Ceramics. 3 hours. Emphasis on structure-property relationships: chemical bonding, crystal structures, crystal chemistry, electrical properties, thermal behavior, defect chemistry. Processing topics: powder preparation, sol-gel synthesis, densification, toughening mechanisms. Materials topics: glasses, dielectrics, superconductors, areogels. Prerequisite(s): MTSE 5100, 5200 or consent of department.
5310. Sol-Gel Processing. 3 hours. Elements of sol-gel synthesis and processing, including colloids, sols, alkoxide chemistry, hydrolysis and condensation reactions, gelation mechanisms, novel synthesis methods, sol-gel thin films, thin film processing and characterization of sol-gel products. Prerequisite(s): MTSE 5300 or consent of department.
5400. Advanced Polymer Physics and Chemistry. 3 hours. Chemical structures, polymerization, molar masses, chain conformations. Rubber elasticity, polymer solutions, glassy state and aging. Mechanical properties, fracture mechanics and viscoelasticity. Dielectric properties. Polymer liquid crystals. Semi-crystalline polymers, polymer melts, rheology and processing. Thermal analysis, microscopy, diffractometry and spectroscopy of polymers. Computer simulations of polymer-based materials.
5410. Polymer Reliability. 3 hours. Reliability of polymers and polymer-based composites (PPCS); flexible, semirigid, rigid, elastromeric, crosslinked polymers, heterogeneous polymer-containing (such as polymer + ceramic) composites and polymer liquid crystals. Prediction of long-term performance from short-term tests. Prerequisite(s): MTSE 5400 or consent of department.
5415. Polymer Viscoelasticity. 3 hours. Polymer structure-property relations, linear and nonlinear viscoelasticity, dynamic mechanical analysis, time temperature superposition, creep and stress relaxation, mechanical models for prediction of polymer deformation, rubber elasticity, environmental effects on polymer deformation, instrumentation for prediction of long term properties. Prerequisite(s): MTSE 5400.
5430. Polymer Rheology and Processing. 3 hours. Experimental methods for viscosity-temperature-shear rate measurements, application to melts, filled systems and suspensions. Injection, extrusion, thermoforming, blow molding, rotational molding, compression and transfer molding, calendaring and post-manufacturing operations. Prerequisite(s): MTSE 5400 or consent of department.
5440. Thermal Analysis. 3 hours. Differential scanning calorimetry; thermogranvimetric metric analysis; dynamic mechanical and thermomechanical analysis; glass transition; melting transitions, relaxations in the glassy state, liquid crystalline phase changes. Prerequisite(s): MTSE 5400 or consent of department.
5500. Electronic, Optical and Magnetic Materials. 3 hours. Intensive study of the properties of electronic, optical and magnetic materials. Electrical and thermal conduction, elementary quantum physics, bonding, band theory, semi-conductors, dielectrics, magnetic properties, superconductivity, optical properties. Prerequisite(s): PHYS 4500 or consent of department.
5515. Materials and Solid State Devices. 3 hours. How electronic, optical and magnetic devices actually work based on a materials perspective. P-N junctions, MOS capacitors, mosfets, CMOS, Bi-CMOS, RF, MRAM and optical detectors/switches; emphasis on the importance of mastering materials properties in electrical engineering device design and integration. Prerequisite(s): MTSE 5500 or consent of department.
5520. Physical and Chemical Basis of Integrated Circuit Fabrication. 3 hours. Current requirements and future trends in processing technology for very large scale integrated circuits and related application. Wafer fabrication, lithography, oxidation, diffusion, ion implantation, film deposition, wet and dry etching, multilevel metal interconnect, process integration and process simulation. Prerequisite(s): MTSE 5500 or consent of department.
5530. Integrated Circuit Packaging. 3 hours. Basic packaging concepts, materials, fabrication, testing and reliability, as well as the basics of electrical, thermal and mechanical considerations as required for the design and manufacturing of microelectronics packaging. Current requirements and future trends are presented. General review of analytical techniques used in the evaluation and failure analysis of microelectronic packages. Prerequisite(s): MTSE 5500 or consent of department.
5540. Materials for Advanced Displays. 3 hours. Materials and processing requirements for new display concepts including field emission displays, organic light emitting displays, flexible displays, laser-based displays and inorganic electroluminescent displays. Special emphasis will be placed on the materials effects on device reliability. Prerequisite(s): MTSE 5500 or consent of department.
5550. Materials and Mechanics for MEMS Devices. 3 hours. Methods, techniques and philosophies used to characterize MEMS structures for engineering applications. Topics include fundamentals of elastic and plastic deformation in microscale, anisotropic material properties, crystalline and non-crystalline materials, and mechanical behavior such as strength, fracture, creep and fatigue as they relate to the microscale design. Material characterization, mechanical testing and mechanical characterization are discussed. Emphasis is on emerging techniques to assess design-relevant mechanical properties. Prerequisite(s): consent of department.
5560. Compound Semiconductor Materials and Devices. 3 hours. Introduction to compound semiconductors; epitaxial growth and electronic properties of heterojunctions (ideal single heterojunctions: isotype and anisotype; non-ideal heterojunctions; and heterojunctions); applications of heterostructures (heterojunction bipolar transistors, modulation-doped field-effects transistors, LEDS, double heterojunction lasers, photodiodes and photoconductors). Prerequisite(s): MTSE 5500 or consent of instructor.
5570. Vacuum Technology and Thin Films. 3 hours. Introduction and basics of kinetic theory, UHV hardware overview and practical system design; introduction to surface physics, thermodynamics versus kinetics of surfaces, growth modes and nucleation barriers. Prerequisite(s): MTSE 5500 or consent of instructor.
5600. Materials Characterization. 3 hours. Survey of atomic and structural analysis techniques as applied to surface and bulk materials. Physical processes involved in the interaction of ions, electrons and photons with solids; characteristics of the emergent radiation in relation to the structure and composition. Prerequisite(s): MTSE 5200, 5300, 5400 or consent of department.
5610. Fundamentals of Surface and Thin Film Analysis. 3 hours. Survey of materials characterization techniques; optical microscopy; Rutherford backscattering; secondary ion mass spectroscopy; ion channeling; scanning tunneling microscopy; x-ray photoelectron spectroscopies; surface properties. Prerequisite(s): MTSE 5600 or consent of department.
5620. Scanning Electron and Ion Microscopy. 3 hours. Theory and applications of scanning electron microscopy and focused ion beam instrumentation. Topics include electron-solid and ion-solid interactions, electron and ion optics, image formation and analysis, X-ray microanalysis, electron backscattered diffraction analysis, focused ion beam patterning and deposition, and specimen preparation. Prerequisite(s): MTSE 5500, PHYS 2220 or equivalent, and consent of instructor.
5625. Scanning Electron and Microscopy Laboratory. 1 hour. Students gain hands-on experience with the SEM, FESEM, FIB, EDS, EDSD and sample preparation equipment. Closely follows the MTSE 5620 lecture course, and concurrent enrollment in both courses is strongly recommended. Prerequisite(s): MTSE 5500, PHYS 2220 or equivalent, and consent of instructor. MTSE 5620 must be completed prior to or concurrently with this laboratory.
5700. Seminar in Materials Science and Engineering. 1-3 hours. Current topics in materials science and engineering.
5710. Computational Materials Science. 3 hours. Focus on the use of computational modeling to understand and evaluate the behavior and materials at scales from the atomistic to the continuum. Introduction to the basic principles used to simulate, model and visualize structures and properties of materials. Topics include the various methods used at different length and time scales ranging from the atomistic to the microscopic. Prerequisite(s): MTSE 5000, 5010 and 6000.
5800-5810. Special Studies in Materials Science. 3 hours each. Organized classes specifically designed to accommodate the needs of students and the demands of program development that are not met by regular offerings. Short courses and workshops on specific topics, organized on a limited-offering basis, to be repeated only upon demand. May be repeated for credit.
5820. Internship in Materials Science. 3 hours. A supervised industrial internship requiring a minimum of 150 clock hours of work experience. Prerequisite(s): consent of department.
5830. Cooperative Education in Materials Science. 3 hours. Supervised work in a job directly related to the student's major, professional field of study or career objective.
5900-5910. Special Problems in Materials Research. 1-6 hours each. Special problems in advanced materials science for graduate students. Problems chosen by the student with approval of the supervising professor and the department chair.
5920-5930. Research Problems in Lieu of Thesis. 3 hours each. An introduction to research; may consist of an experimental, theoretical or review topic.
5940. Seminar in Current Materials Science Literature. 1-3 hours. Reports and discussion of current materials science research published in journals and other means of dissemination of research.
5950. Master's Thesis. 3 or 6 hours. To be scheduled only with consent of department, 6 hours of credit required. No credit assigned until thesis has been completed and filed with the graduate dean. Continuous enrollment required once work on thesis has begun. May be repeated for credit.
5960. Materials Science Institute. 1-6 hours. For students accepted by the university as participants in special institute programs. May be repeated for credit, not to exceed a total of 6 hours in each course. Laboratory fee required.
6000. Quantum Mechanics for Materials Scientists. 3 hours. The Schrödinger equation, atomic theory, solid state theory, band structure, tunneling and scattering with an emphasis on materials properties. Prerequisite(s): MTSE 5500 or consent of department.
6110. Applied Fracture Mechanics. 3 hours. Linear elastic fracture mechanics, elastic-plastic fracture mechanics, time dependent failure, creep and fatigue, experimental analysis of fracture and failure of metals, ceramics, polymers and composites. Failure analysis related to material, product design, manufacturing and product. Prerequisite(s): MTSE 6100 or consent of department.
6120. Composite Material. 3 hours. Fibers; matrix materials; interfaces; polymer matrix composites; metal matrix composites; ceramic matrix composites; carbon fiber composites; micromechanics, macromechanics, laminate theory and application, design, failure analysis. Prerequisite(s): MTSE 6100 or consent of department.
6200. Imperfections in Solids. 3 hours. Point defects in semiconductors, metals, ceramics and non-ideal defect structures; non-equilibrium conditions produced by irradiation or quenching; effects or defects on electrical and physical properties, effects of defects at interfaces between differing materials. Prerequisite(s): MTSE 5500 or consent of department.
6210. Deformation Mechanisms in Solid Materials. 3 hours. Discussions on microelasticity and microplasticity of materials. Application of dislocation theory to understand deformation mechanisms related to strengthening. Interactions of dislocation with solute precipitates, dispersoid, grain boundary and barriers are presented. Deformation mechanisms in amorphous and polymeric materials. Micromechanisms of deformation in fatigue, creep, creep-fatigue and strain-rate loading are described.
6300. Phase Transformations. 3 hours. Thermodynamics, kinetic and structural aspects of metallic and ceramic phase transformations; mechanisms and rate-determining factors in solid-phase reactions; diffusion processes, nucleation theory, precipitations from solid solution, order-disorder phenomena and applications of binary and ternary phase diagrams. Prerequisite(s): MTSE 5300 or consent of department.
6400. Advanced Electron Microscopy. 3 hours. Theory and applications of scanning and transmission electron microscopy; sample preparation and analytical techniques. Prerequisite(s): MTSE 5600 or consent of department.
6600. Transmission Electron Microscope. 3 hours. Theory and applications of transmission electron microscopy. Topics include electron-solid interactions, electron optics, image formation and analysis, electron diffraction, defect analysis, X-ray microanalysis, electron energy loss spectroscopy, energy filtered imaging, scanning transmission electron microscopy, Z-contrast imaging, and specimen preparation. Prerequisite(s): MTSE 5620.
6605. Transmission Electron Microscopy. 1 hour. Students gain hands-on experience in TEM, electron diffraction, EDS, STEM, and sample preparation equipment. Closely follows the MTSE 6600 lecture course, and concurrent enrollment in both courses is strongly recommended. Prerequisite(s): MTSE 5620. MTSE 6600 must be completed prior to or concurrently with this laboratory.
6610. Diffraction Science. 3 hours. Diffraction theory; scattering and diffraction experiments; kinematic theory; dynamical theory; x-ray topography; crystal structure analysis; disordered crystals; quasi-crystals. Prerequisite(s): MTSE 5600, 5610 or consent of department.
6620. Advanced Electron and Ion Microscopy. 2 hours. Gives students with existing electron and ion microscopy backgrounds the opportunity to gain theoretical and practical knowledge of advanced analytical techniques. Specific advanced topics include focused ion beam specimen preparation and patterning, Z-contrast scanning transmission electron microscopy, advanced diffraction and defect analysis, electron energy loss spectroscopy and energy filtered imaging in the transmission electron microscope, high resolution transmission electron microscopy imaging and 3D imaging of nanostructures using focused ion beam and tilt-series transmission electron microscopy. Specific applications of these techniques to modern problems in materials science are stressed. Prerequisite(s): MTSE 6600 and MTSE 6605.
6625. Advanced Electron and Ion Microscopy Laboratory. 1 hour. Gives students with existing electron and ion microscopy backgrounds the opportunity to gain hands-on knowledge of advanced analytical microscopy techniques. Specific advanced topics include focused ion beam specimen preparation and patterning, Z-contrast scanning transmission electron microscopy, advanced diffraction and defect analysis, electron energy loss spectroscopy and energy filtered imaging in the transmission electron microscope, high resolution transmission electron microscopy imaging and 3D imaging of nanostructures using focused ion beam and tilt-series transmission electron microscopy. Specific applications of these techniques to modern problems in materials science are stressed. Prerequisite(s): MTSE 6600 and MTSE 6605. MTSE 6620 must be completed prior to or concurrently with this laboratory.
6800. Selected Topics in Materials Science. 3 hours. Topics from specialized areas of materials science, physics and chemistry. May be repeated for credit as topics vary.
6900-6910. Special Problems. 1-3 hours each. Special problems in experimental or theoretical for advanced materials science graduate students. Problem chosen by the student with the approval of the supervising professor.
6940. Individual Research. 1-3 hours. To be scheduled by the doctoral candidate engaged in research. May be repeated for credit.
6950. Doctoral Dissertation. 3, 6 or 9 hours. To be scheduled only with consent of department. 12 hours credit required. No credit assigned until dissertation has been completed and filed with the graduate dean. Doctoral students must maintain continuous enrollment in this course subsequent to passing qualifying examination for admission to candidacy. May be repeated for credit.
6970. Seminar for Doctoral Candidates. 3 hours. Demonstration of competence in a specific area of materials science as evidenced by criteria established by the faculty of each discipline. May be repeated for credit.
6990. Postdoctoral Research. 3 hours. For postdoctoral fellows to further training and research experience in developing and solving problems independently. Prerequisite(s): consent of department. May be repeated for credit.
Date of initial release: July 1, 2008 — Copyright © 2008 University of North Texas
Page updated: August 4, 2008 — Comments or corrections: email@example.com
“University of North Texas,” “UNT” and “Discover the power of ideas” are officially registered trademarks of the University of North Texas; their use by others is legally restricted. If you have questions about using any of these marks, please contact the UNT Division of University Relations, Communications and Marketing at (940) 565-2108 or e-mail firstname.lastname@example.org.